Emerging new market electronic applications require over-voltage protection on the low value range ...

A method of identifying pertinent transform coefficients in an object classification method for ...

Apparatus for activating telephone services includes a central processing unit and a storage device ...

A system requires a small, low current, high per- formance VHF receiver to operate along side one ...

EXISTING METHODS Wueless communication systems often require extremely accurate modulation methods. ...

The purpose of the algorithm described in this paper is to design an IIR filter network which ...

A new drain region process to control erased V, distribution by moving drain junction implants ...

The gap logic described below is used in PLL based systems where in addition to the reference and ...

With the growth of Motorola's alpha-numeric pag- ing portfolio, there is a detinite need to address ...

Water containing As waste is generated in many industrial processes, one of which is the ...

During development of thin film silicon-on- insulator (TFSOI) devices, there were die-by-die and ...

Positioning a source of decoupling capacitance very close to the input,and outputs of an integrated ...

Most pagers on the market today offer a feature called "Duplicate Page Detection? This feature ...

The problem to be solved by this design is the lack of full support in all directions, and the lack ...

Many current and emerging electronic applications require transient voltage protection on the low ...

This method provides an accurate method of maintaining the voltage differential condition imposed ...

The main processor system in a GSM base station uses program code stored in volatile RAM. In a ...

As the complexity of designs increase and higher- level tools become available for digital design, ...

Metallization of three-dimensional (3D) molded polymer substrates by DC sputtering is an exciting ...

At times when minimum battery drain is required and a regulated voltage is needed to supply a ...

With dot matrix displays becoming popular in pagers, the types of information that can be displayed ...

Currently this process to determine when to switch between sites is only done when the radio is on ...

Hardware emulation is used by Motorola design teams to increase their confidence in 100% hmc- ...

High dynamic range of the HF SSB receiver is one ofits important design goals. High dynamic range ...

Telecommunications systems consist of two dis- tinct areas of responsibility: the user side and the ...

There is a need for a reliable reset and battery disconnect for a new generation of mobile data ...

In today's SmartZone systems, the subscriber units use RSSI (Received Signal Strength Indica- tion) ...

Portable radio users ofien utilize signaling to con- tact specific units. This device provides the ...

Ocean /air Surfing April 27 2002 1. The Concept The purpose of this creation is to enable ...

Wet chemical etching ofunmasked silicon regions is performed in semiconductor discrete processing ...

The current RXCDR does not accept packet switched voice. The RXCDR has a dedicated chan- nel ...

Nickel electrode NiMH cells typically heat significantly at the beginning of fast charge. This ...

The exhaust from the acid exhaust scrubbers at semiconductor plants otlen contains ammonia salts as ...

In wireless, trunked communication systems, mobile radio system access occurs over control chan- ...

To date we have been processing wafers with solder bumps for flip chip applications and have ...

Within the iDEN system, a technique called bypass is used to prevent audio degradation when two ...

Powerful data processing chips may have large instruction sets containing as many as 500 instruc- ...

This invention uses a time reference at each site that is coordinated with a universal time ...

A dispatch controller (DAP) provides mobility management and call control for dispatch services. In ...

Disclosed is a method for a quick-turn monitor (QTM) for assembly-induced inter-layer dielectric ...

A method is described to improve the efficiency of test for the charge redistribution analog to ...

Based on envelope power probability distribution function (PDF), a calculation method to predict ...

Disclosed is a method for an optimized 10-GHz differential signaling package layout for a typical ...

Disclosed is a method for an optimized 10-GHz differential signaling package layout for a joint ...

Due to the large number of people using 2-way radio communications devices, there is a large vari- ...

FIELD OF THE INVENTION This invention will reduce power during read accesses of multiport register ...

While the MOS Conformance test will assure that all manufacturer's compliant radios meet the ...

In current trunked systems, a remote site must be taken down or have its trunking services reduced ...

The system is an APCO25 digital 2-way radio conventional system with repeaters, or it is an APCO25 ...

Sensitive communication portable equipment such as a "Secure" 2 way radio can be lost or stolen. ...

The proposed circuit is shown in Figure 1. The intent of this circuit is to take a digital logic ...

Wafers having non-uniform bond pad reflectivity have caused poor pattern recognition during the ...

In a telephone set, a common way to insure that the signal generated in the microphone does not ...

The Adept MV controller (Adept Technology, Inc.) is a high performance, general purpose motion ...

In a switch for a catalytic converter heater used in an automobile, it is possible to minimize the ...

This document expresses the Internet Society's ideology that the Internet really is for everyone. ...

Disclosed is a method for time domain reflectometry (TDR) base system for connector testing. ...

Disclosed is a method for embedded plated through-holes (PTHs) in an organic substrate core. ...

Disclosed is a method that uses broadside impedance structures to accurately measure layer ...

Disclosed is a method for a heatsink clip design with adjustable attaching forces and self-aligned ...

Disclosed is a method for ball grid array (BGA) package design. Benefits include improved thermal ...

Disclosed is a method for a snap-together casing for CPU packaging with an integrated heat spreader ...

Disclosed is a method for a sliding fillet fork to control overmold as underfill (OMUF) flow to ...

Disclosed is a method for a silicon substrate noise isolation technique through package technology. ...

Disclosed is a method for interlocking features and a periodic array of metal vias on metal core ...

Disclosed is a method for reusable covered carrier tape. Benefits include improved reliability and ...

Disclosed is a method for the controlled redeposition of laser-ablated material to form a thin ...

Disclosed is a method for enhancement of cracks in organic materials for x-ray inspection. Benefits ...

Disclosed is a method for using fiber optics to reroute LED light for color vision inspection at ...

Disclosed is a method for consolidating multiple blade ejector keying and grounding into fewer ...

The electronics industry is recognizing the requirements for better utilization of the area of ...

Modern wireless communications base stations often need to have the ability to detect Tone-Control ...

The subject of low power IC design is ofparticu- lar interest over the last two or three years [I]. ...

In trunked systems, ACC OSWs inform a subscriber unit of sites it should attempt to choose from ...

As IC's grow more dense in transistor count the time it takes to test those It's also grows. Most ...

An advanced silicon integrated circuit process utilizes a sub-micron trench extending through a ...

In a very wide area communication system, there may be a centralized database (Home Location Reg- ...

Modem wireless communications base stations offen require a high stability frequency reference with ...

The shoe clip 10 shown in Figures 1 and 2 is an optional accessory for holstered pagers 25. The ...

Advanced multi-level metal technologies being developed in research and development laboratories ...

When an individual makes a landline to mobile/ portable radio-telephone telephone call, and the ...

The concept of the coefficient of joint stiffness and the force distribution ratio are developed to ...

Existing battery recognition schemes use one capacity resistor (Rc) to define the battery type/ ...

Today's radios are not able to determine the chemistry type battery connected and as such can not ...

Accurate simulation of delays in logic circuits is normally performed using gate-level context ...

The Soft ID Encode Feature allows for entry of an alphanumeric character string which associates a ...

The problem of how to allow charging of a lith- ium ion based battery pack in a nickel cadmium/ ...

In circuit data, however, there is no assurance that sufficient DTX opportunities will exist. This ...

In circuit data, however, there is no assurance that sufficient DTX opportunities will exist. This ...

MultiZone is a very wide area system that con- sists of standalone zones that have been networked ...

This new circuit replaces one of the diodes with a transistor acting as a switch or active ...

Parylene C is being explored as an encapsulant coating for bulk micromachined silicon ...

Subscriber radios have a need to scan for multi- ple different accessories at their accessory ...

(Z)-5-Muscenone and (E)-5-Muscenone, and their odorant characteristics are described. These two ...

The term "transducer" applies to any piezoelec- tric devices which perform the transformation of ...

There are times when "Time-to-Market" is more important than the cost of silicon. One example is ...

Emergency alarms are sent by subscriber units to indicate some type of emergency condition to the ...

This paper describes the architecture and bene- fits of a new application program MERGE-TABLE. This ...

Zener Diodes' have been commonly used for ESD protection circuits. Traditional Zener imple- ...

Multibit quantizers in sigma delta analog to dig- ital converters increase the achievable SNDR by ...

The energy ofa digital CMOS circuit is given by E = 1/2CV2, where C is the loading capacitance ...

PowerPC microprocessors as well as many other current high performance microprocessors perform ...

Heat is generated during the operation of devices undergoing final test. Any increase in device ...

A method was developed to counter board warpage created by attaching die, die packages, ...

Radio users have the ability to establish emer- gency alarms and calls within a communication sys- ...

A subscriber tuple in the DAP contains differ- ent elements and most of them can be changed by the ...

This works good and can be implemented with very little circuitry. Unfortunately, even low leakage ...

In radio systems supporting a mobile and/or port- able subscriber base and using multiple RF chan- ...

When electroplating printed circuit boards, it is often desired to deposit metal only at particular ...

Figure la: Pager Front View Figure 2~7: Pager Holster 01: Give me a cdl back at (109) 555-1212 by ...

In order to eliminate thin (5 mils) wafer break- age due to shock forces and process vibration, ...

A circuit was required that would detect when current was drawn by a varying AC load and once this ...

Increased usage of maildrop services in the pag- ing industry has resulted in pagers having the ...

The current method of secure steering in the if the clear resources are either busy or unavailable. ...

Clamping and aligning of the LCD tab to the PC board requires that multiple manual operations be ...

As the feature size of the ultra large scale inte- gration (ULSI) devices shrinks, the importance ...

Micro-cell communication equipment requires light and compact base site equipment that can be ...

Expensive, special transport equipment is needed to carry a composite analog signal consisting of ...

ID605588

ID607778

In a mobile radio environment, comprising a mobile two-way radio device mounted in a service ...

Scan is a feature that allows a radio user to mon- itor activity on more than just his or her ...

Currently, a user is allowed to select one of vari- ous alert cadences from a user-selectable alert ...

A typical chip design process involves develop- ing the RTL (Register Transfer Language) model or ...

Due to the large number of people using 2-way radio communications devices, there is a large vari- ...

The concept of radio service areas has been brought to light in recent years with the advent of ...

In the iDEN base station, a voltage controlled crystal oscillator is phase locked to a high ...

Typical assembly methods for Reaction Injec- tion Molded (RIM) and other thermos& parts include ...

Over-The-Air programming is a feature sup- ported by pagers to allow a service provider to pro- ...

ID202039

This document proposes a new sub-option to the DHCP (Dynamic Host Configuration Protocol) Relay ...

This document describes an extension to the mapping of Point-to-Point Protocol (PPP) into ...

In the field of voltage regulators, driver controllers are used to select and control the operation ...

The apparatus and methods disclosed herein relate to cooling devices generally, and more ...

Disclosed is a method for a liquid-vapor phase change heat-transfer device with a flexible ...

Wrthin integrated microprocessor based devices, it is desirable to provide an internal bus protocol ...

In contemporary pagers, a received page (whose address codeword has been successmlly detected) ...

Government restrictions of CFC solvents has pushed the electronics industry towards "no-clean" ...

The invention provides a means ofachieving high multiples ofthe input frequency, while providing ...

A personal location device with transmit capa- bilities, such as a GPS receiver incorporated in a ...

In all communication equipment it is necessary to have RF-areas shielded. It is standard practice ...

One line Recognition schemes that use a peri- odic time base to determine an option select type are ...

The measurement technique described here would dramatically simplify the task of establishing a ...

This publication describes a solution to the prob- lem of adding more DAP's (Dispatch Application ...

Over the Air (OTA) programming allows a pag- ing operator to remotely change the configurations of ...

In a microprocessor utilizing a memory cache which contains executable instructions, a fetch of an ...

Disclosed is a method for a design for simultaneous handling/processing of multiple components ...

Disclosed is a method for an alternate via for printed wire boards (PWBs). Benefits include ...

Disclosed is a method for a mirrored stacked-die package. Benefits include improved functionality ...

Scan chains are traditionally formed in the logical domain to address design for testability ...

Disclosed is a method for using a highly thermal-conductive keypad and metallic front panel to ...

Disclosed is a method for a socket with enhanced power delivery. Benefits include improved power ...

Disclosed is a method for highly isolated power planes and/or ground planes using stepped impedance ...

Disclosed is a method for electrolytic plating without a plating bar for a one-sided electronic ...

Disclosed is a method for a heat-pipe connector. Benefits include improved thermal performance.

Disclosed is a method for a mouse-bite substrate alignment feature. Benefits include improved ...

Disclosed is a method for a compliant interconnection using an edge ring for chip attachment. ...

The disclosed method is for a Z-axis force-distribution elastomeric gasket for BGA devices with ...

Disclosed is a method for multi-stack wafer-level packaging (MS-WLP). Benefits include simplified ...

Disclosed is a method for a contactless carrier-tape end fixture. Benefits include improved yield.

There may be situations in which it is advanta- geous to have a display on a product such as a ...

A 'Wrong Number' call, especially when it is a long distant call can be costly. Presently no way to ...

Two-way portable radios ohen are used with a remote speaker/microphone (spkr/mic) accessory. The ...

One area of growing interest is the ability to send a printed document containing dithered ...

The market place has shown that consumers demand ever smaller computers. Impressive achieve- ments ...

The media access control for Wirelesss Modem subscriber devices, such as Cellular Digital Packet ...

Triangular wave generator circuits are used in many modem circuit applications. Examples of these ...

This invention allows the radio to select an exter- nal option class (external speaker, external ...

A full-scan microprocessor architecture requires connecting every flip-flop in the design together ...

A pallet (work holder) has been historically designed and built for each new product in order to ...

An alternative method to epoxy ring construc- tion is described. Fixtures manufactured using con- ...

This memo captures Diffserv working group agreements concerning new and improved terminology, and ...

This memo describes a set of practices intended to enable an authoritative name server operator to ...

When discussing systems for making information accessible through the Internet in standardized ...

Disclosed is a method for a stacked solder-paste printing technology. Benefits include improved ...

Disclosed is a method for a universal ejector array. Benefits include reduced product damage and ...

Disclosed is a method for a semiconductor package with an integrated self-alignment and retention ...

Disclosed is a method for anchoring micro-vias to enhance via reliability in substrates. Benefits ...

Disclosed is a method for an innovative technique to produce ultra-thin wafers using bombardment ...

Disclosed is a method for an interposer attach (IPA) pick-and-place standardized tray nozzle. ...

Abstract: This paper demonstrates how by using what is taught in United States Patent #6,061,107 ...

ID110212

Channel access rules become necessary in dig- ital communication systems that require subscriber ...

Size minimization ofconsumer electronics chal- lenges the design of the user interface to be ...

Most wafer thinning operations protect the front side (circuit side) of their wafers with a ...

A common problem encountered in digitizing an analog signal is minimizing the bandwidth required to ...

Industrial businesses often have remote, offsite facilities where materials are stored or processed ...

Precision analog IC functions such as filtering and signal conversion (A/D and D/A converters) ...

For each "request for registration" sent to all sites, one ofthree outcomes can occur as follows: ...

In Cellular telephone systems it is desirable to maximize the use of the available Radio frequency ...

High speed chip mounters when running at full speed can place approximately 25000 parts per ...

The following invention draws the user's atten- tion to any messages that could be urgent and ...

To date, systems featuring call handoff have com- monly selected their handoff destinations using ...

ID202035

Ein Konus mit genau definierter Position wird mit konstanter Kraft in eine Innenbohrung eingeführt. ...

In a SmartZone two-way radio system, there are certain features which require that a radio user ...

There are a growing number of legacy two-way wireless system types. Many of the systems are ...

Presented here is the idea of a Cryptographic Signal Processor (or CSP for short). The CSP is ...

The system is a Project 25 conventional land mobile radio system using conventional talk groups ...

In an effort to minimize busy conditions in low- density SmartZone sites, it is necessary to ...

In current SmartZone systems, with low tier or high tier telephone interconnect hmctionality, a ...

In today's trunked two-way radio systems, every radio user communication unit is pre-programmed ...

The system is a conventional land mobile radio system. The system may or may not have repeaters.

In current trunked systems that utilize a LAN network to allow communication between stations, a ...

In situations involving hazardous chemical envi- ronments, sensitive electrical equipment, or other ...

AFCO 25 specifies a packet data service that must coexist on a shared channel with voice. When ...

This document describes the applicability of the Stream Control Transmission Protocol (SCTP). It ...

Poly(phenylene ether) resins, PPE, notably poly(2,6-dimethylphenylene ether) and ...

The use of power devices causes a number of major design issues when trying to integrate them into ...

Currently, a two-way radio user is unaware of any phone calls that were missed while the radio was ...

Bent shahs on vibrator motor components have opposite the counterweight mass. This feature would ...

The present invention relates generally to com- munication systems where there are Conventional and ...

In current two-way radio systems each radio can be associated with one or many talkgroups. A ...

As part of radio control systems management like SIMS for Smartnet or SmartZone Radio Dis- patch ...

Encryption is used to protect information in sys- tems where sensitive audio is transmitted over ...

Transmitters of phase and frequency modulation type are designed to generate a constant amplitude ...

A common problem for people using a wireless system on the street today is that they find they ...

The volume adjustment for many radio and tele- phone products is through the depression oftwo but- ...

In a multiple site trunking system, radios routinely roam between sites. When a radio is in an ...

Disclosed is a method for multiplexing signal functionality on a hot-swap fan light emitting diode ...

A high performance asynchronous interface exists between the RapidIO port's physical and protocol ...

Junction temperatures and self-heating of semiconductor devices can be measured using an A/D and ...

This proposal describes a mechanism for separating the sampling of positive and negative edge ...

Slip tuning has often been time consuming and costly. A quantitative and cost effective method for ...

A method for fabricating magnetic multilayers as required for high-aspect ratio cladding structures ...

We propose a method for implementation of laser annealing to activate the extension and ...

A process to minimize/eliminate copper-tin intermetallic formation, during electroplated flip chip ...

Implementing the Java Application Manager (JAM) using a split architecture increases portability, ...

Poly-silicon compatibility issues with a metal-oxide dielectric is reported and methods to achieve ...

This report describes a new substrate anti-fuse element and method of its operation for ...

Techniques are described to enable accurate navigation of an integrated circuit while viewing the ...

De-wetting or agglomeration occurs when material is allowed to be mobile on a surface and seek the ...

Encapsulation of flip chip packages with underfill epoxy is critical for package reliability. ...

The ITU-T Specification T.82 Information Technology Coded Representation of Picture and Audio ...

Page buffer control is implemented on a microcontroller with a large embedded flash EEPROM memory ...

For architectures with a single port access to local memory and accesses to local memory is ...

Disclosed is a method of thermal management for flip-chip (C4) backside mechanical contact probing. ...

Rechargeable batteries are increasingly used in electronic products for economic and environmental ...

This invention provides additional safety to a radio operator by improving the effectiveness and ...

Whenever a reliable radio communication sys- tem is required, it is important to be able to moni- ...

In a trunked voice/data system, when the data traffic load at a site is too high for one channel, ...

Today on a Motorola trunked SMR, there exists a limitation on the amount of ISW traffic a SMR fixed ...

The use ofdyes in die attach adhesives is benefi- cial for improving the inspection portion of this ...

Low phase noise is an important property of the synthesizer in HF SSB radio. The phase noise is ...

Watchdog timer circuits detect software process- ing errors, allowing the radio hardware to reset ...

The two-way radios in today's market are very often expensive. To manufacture, they require a num- ...

Memory arrays in this document refer to a SBAM or DRAM core with at least one write port. Exam- ...

This is a description of how the series intercon- nection of plated through holes in a substrate ...

This publication describes a method to reduce the probability of degrading TCP data application ...

Disclosed is a method for a balanced load surface-mount, shielded, flexible contact for an ...

Disclosed is a method for a wafer saw clamp rotor lubricator. Benefits include reduced equipment ...

Disclosed is a method for remote management of a computer with multiple network connections. ...

As the use of electronic gadgets increases, the conventional two outlet power source is ...

Bicycling is a popular means of transportation for millions of people. However, traveling at night ...

ID402116

In summary, this idea covers the design and method of making a high-power module. A high- power ...

Radios which are to be mounted in vehicles are built as independent units which are assembled to ...

One area ofgrowing interest is the ability to send a printed document containing dithered ...

The electrical test ofmultiple semiconductor die modules or packages have to address the problem of ...

This invention provides a means of detecting the battery's temperature and capacity or related ...

Many of Motorola's existing paging products in the field can be impacted or scratched in the front, ...

This proposal eliminates two of the four battery contacts presently necessary on the battery to ...

Many of the Data systems that are currently pro- vided offer a means of receiving data via a ...

The novel idea of "Stacked Capacitors in Stripline Circuits" turns a problem stray capacitance into ...

The plastic Quad Flat Package has evolved into a large, high pin count package, however higher ...

Electronic circuit board strain due to bending determination. Strain gages are comprised of thin in ...

UV-B and UV-A radiations have acute, delayed and long term effects on the skin and hair. The use of ...

Disclosed is a method for capturing independent packets during automated conformance testing of ...

Disclosed is a method for improving the performance of an IP media device. Benefits include ...

Disclosed is a method for a thermocouple attachment to a metallic surface using solder. Benefits ...

Disclosed is a method for an ESD grounding clip for next-generation form factor modules. Benefits ...

Disclosed is a method for a built-in magazine lock. Benefits include improved productivity.

Disclosed is a method for a measurement technique for extracting package inductance. Benefits ...

Disclosed is a method for an integrated on-chip thermoelectric cooling (TEC) module. Benefits ...

Disclosed is a method for an electrostatic discharge (ESD) event detector-magnetic loop antenna. ...

Disclosed is a method for solder ball stand-off management to enable ball-side package decoupling ...

Disclosed is a method for a heat transfer surface design. Benefits include improved thermal ...

Disclosed is a method for a redundant cooling solution using blowers and fans. Benefits include ...

Disclosed is a method for improving the thermal interface between the die and thermal solution by ...

A parking system based on cellular and short-range communications is proposed.

Traditionally, integrated heat spreaders are attached to the individual units one-by-one either ...

A startup circuit that supplies current to a Beta multiplier reference circuit is presented. At ...

As pagers and cellular phones continue to gain devices. Cellular phones containing pager functions ...

Several Motorola portable and mobile radios zone/channel via the radio keypad. The radio uses ...

There are many products in the market which require keylock feature in the main control knob to ...

This paper describes a system or algorithm that can be implemented on duplex radios to perform on ...

The present invention provides a method and apparatus for secure communications over Internet. The ...

The power module driver block diagram shown in Figure 1 provides the necessary interface to power ...

Multicasting is not well addressed in wide area network. The present invention provides a method ...

Generally, a certain portion of a pager's main memory is allocated, dynamically or statically, for ...

Portable computing devices such as notebook computers, personal digital assistants (PDA), and the ...

Present solutions which regulate the operating temperature of apparatus used in information trans- ...

To estimate the integrity of a digital communi- cations channel, it is often desired to compute ...

An approach to laying out features in a layer of material in an IC designed for use with phase ...

A single phase shifting mask (PSM) can be used to form shapes on a wafer. This PSM uses chrome to ...

To provide optimal printing resolution, a full phase PSM mask can be used in a Damascene process. ...

Phase assignments on a phase-shift mask can require feature definition with a corresponding binary ...

When circuit boards are manufactured in an array format (i.e. multiple printed circuits in the same ...

This invention is built on the Patent Disclosure, "Two-Way Calling in Public CT2 System Using Call ...

The design of fiber optics transmit and receive hardware requires that the fiber optics cable have ...

Periodic data broadcasting (news, stock quotes, weather, etc.) over paging and other radio channels ...

The development of mobile worker solutions, such as meter reading or police report writing soft- ...

OPERATION: The user phones the local paging bureau. The operator enters the pager number and ...

The Enhanced Specialized Mobile Radio (ESMR) network integrates 5 different services- dispatch, ...

The structure described here is a current source for an integrated MESFET process which provides a ...

Many voice activated speakerphone circuits have been implemented in a number ofofftce and mobile ...

This invention provides a means ofdetecting the battery's temperature (Rt) and capacity (Cc) or ...

Trunked control of voice resources is accom- plished by assigning one entity to one resource for ...

A test fixture is disclosed for identifying individual wires within a multi-wire lead for ...

A multi-rail standard cell architecture is provided, wherein multiple voltages can be ...

Disclosed is a method for producing a heat pipe enhanced thin-fin mushroom heatsink. Benefits ...

Disclosed is a method for decreasing electromagnetic leakage through enclosure seams. Benefits ...

In the implantable medical device field, a medical device, configured to perform a desired medical ...

A unique process technique was applied to produce extruded thermoplastic materials with fleck ...

Disclosed is a method for the formation of a sacrificial oxide-on-copper seed surface. Benefits ...

Disclosed is a method for accurate and unified techniques for speculation and recovery code ...

Adding special effect additives into polymer matrix to create an artificial special appearance have ...

Low Drop Out (LDO) voltage regulators having a low noise characteristic are becoming increasingly ...

As the SRAM bitcell area is continually being reduced to meet the demands of higher density ...

In dispatch centers, presently every operator gets all the inbound call activity presented to them ...

Customers expect that most hardware today- especially digital or processor-based hardware-be ...

Increasing product complexities and shrinking product sizes drives higher functional and device ...

This document describes key features of PRE- CISE, a software package to create customized ROM ...

As part of radio control systems management like SIMS for Smartnet or SmartZone Dispatcher for ...

In a batch reactor you have two viewport open- ings, one for endpoint and the other for ...

Many communications systems use the same wire line or communications link for both data and voice. ...

The vibrator or silent alert used in pagers is a DC motor with a weight distribution that is unbal- ...

In some countries, the clock is put forward or backward because the time that daylight is available ...

Motorola has several products implemented in poll loop event driven applications nameworks. These ...

ID201602

ID609611

RFC 2916 assigned responsibility for a number of administrative and operational details of ...

In current analog trunking systems, Motorola provides a secure l2kb option. This option will give a ...

A trunked radio system, as shown in Figure I, consists of a trunking system controller (TSC), a ...

There exist today, computer based programs that can alert a user when there is a problem detected ...

Existing SF1 lit? blades run on SS bearing guide The lift blades in use are made of a mild steel. ...

It is at times desired to generate random bit streams in a real-time DSP for the purpose oftesting ...

A L/4 wavelength free space dipole is used as a reference antenna for comparison with the inven- ...

Conventionally, messages in a pager are accessed by only one user when the pager is not shared. It ...

The REPEATED MESSAGE feature is an im- proved version to the current DUPLICATE MES- SAGE feature ...

Inner network audits check for and correct incon- sistencies on a multi-master redundant database. ...

SYSTEM BACKGROUND: The system is a 2-way radio trunking system such as Smartnet or SmartZone. THE ...

The system is conventional Over-The-Air- Rekeying (OTAR) or is trunking OTAR. Radios with ...

ID605914

ID605913

High power supply rejection ratios (PSRR) is one of the most important performance features of ...

Disclosed is a method for an embedded classroom digital assistant. Benefits include improved ...

Disclosed is a method for predicate analysis. Benefits include improved functionality and improved ...

Disclosed is a method for efficient approximation of integer and floating-point square root, ...

This paper explains how GSM technology can be used to create an alarm system that is more ...

This paper provides a description of an availability measurement system for IP networks with the ...

Received call queues are used in both channel- based and call-based dispatch consoles to retain a ...

Many communication devices are required to dis- play alphanumeric messages. Some of these devices, ...

The customer requirement was a solid state relay which was isolated from the control circuitry and ...

SAC (Subscriber Access Control) records are currently not stored at each zone because of mem- ory ...

FIELD OF INVENTION The potential applications for this invention relates in general to all products ...

An inherent problem in crystal oscillators is that the frequency will vary as a function ...

Voice recognition is used to turn voice to text so that just the text and a digital voice ...

The current method of servicing asynchronous links (i.e. site links, MBX links, etc.) is a serial ...

A common problem with audio accessories such as earpieces and headsets, is the breakage ofthe wires ...

Battery life has been a concern in paging appli- cations whereby there is a constant effort to look ...

This invention proposes a channel access algo- rithm that is particularly suited to an integrated ...

This document defines a reformulation of IP and two transport layer protocols (TCP and UDP) as XML ...

Mostly Pointless Lamp Switching (MPLampS) is an architecture for carrying electricity over IP ...

Disclosed is a method for briefcase cooling. Benefits include improved functionality.

The disclosed method is for a hybrid radio architecture. Benefits include improved functionality ...

An improved ring contact connector for a medical lead is longitudinally preloaded to increase the ...

In audio applications, the required quality level is always increasing. Among the parameters ...

In a wireless communication system (analog or digital), interference on a control channel can ...

When software for microcontroller is masked i.e. included as part ofthe manufacture ofthe microcon- ...

The new generation of Motorola Alpha-numeric products support dual message display mode. The first ...

In a piezoresistive pressure sensor, a deep cavity is etched using chemicals such as NaOH or KOH to ...

Communications systems typically have a lim- ited bandwidth in which to transmit voice informa- ...

The current pager market is flooded with pagers with different designs and operating procedures. ...

(1) QUANTUM DIODE FULL-ADDER The full-adder consists of two quantum diodes like a full-adder. Four ...

Figure 1 shows a dual-port SRAM cell which write-transistor when WRITE is high. The data consists ...

1. GENERAL The main focus of this idea is to simplify the handling of radio device alignment in the ...

Battery life is a big concern for some ofthe selec- tive signaling systems, such as PCS and Paging ...

These papers present an improved semiautomatic LCD and Frame Assembly Device. The semiauto- matic ...

This document was written during the process of clarification of RFC2598 "An Expedited Forwarding ...