A method for evaluating whether a patient is suited to chronic nerve stimulation as a therapy for ...

The purpose of fast auto deatliliation is to enable a trunked system to quickly deafiliate radios. ...

This discussion deals with an enhancement to a design methodology entitled 'Logic Circuit for ASIC ...

A sidewall spacer is used to define deep-submicron features in "slot" processes for many advanced ...

A bossed silicon capacitive absolute pressure sen- sor can be fabricated to provide the following ...

There is a need for a common global trunking subscriber unit that does not need a unique character ...

In today's communication systems there are only two methods for a user that normally communicates ...

Transistors Ql and Q2 shown in the above sche- matic are the output devices of an operational ...

In the past, manual workholders to hold down ceramic substrates for wirebonding has shown to be ...

The concept is to use a polyvinylidene fluoride (PVDF) material as a transducer/label combination ...

The following describes a technology to allow groups of pagers to have their time updated from a ...

Many pager users prefer to remove their pager from their belt when seated at a desk or worktable. ...

Pager users most often wear their pagers clipped directly to their belt or an article of clothing. ...

The Mirapol A 400 is a neutralized phosphonocarboxylic acid (CAS number : 143239-08-1), that ...

In CDMA systems (IS-95, IS-2000, etc.), the transmitter pulse shaping filter is a 48-tap FIR filter ...

This document is described for extraction and purification of secoisolariciresinol diglucoside ...

Elliptic curve cryptography is rapidly becoming the public key cryptographic algorithm of choice ...

Creation of an isolated EMI/RF environment by way of a electrically conductive can lined with RF ...

The following describes a technology to allow com- puter peripherals to be able to process ...

The depletion mode device operates with a negative the negative feedback to Ql through R2. The ...

Transmitter turn-on time (TTO) is defined as the terminal users, since it directly affects the ...

Preliminary data on voice quality for digitally coded high speed, the error correcting code can ...

In a busy bunked radio system, mobile radio requests for voice channel often get a busy signal, ...

Electronic devices requiring speakers are faced with the potential problems of integrating the ...

The latest development in the PCB industry is the introduction of cladded boards. This is a process ...

One of the most important reliability issues in flip chip packaging is the thermo-mechanical stress ...

This paper presents an algorithm for balancing resource utilization across three resources in the ...

Current microprocessor based systems use inter- rupt vectors which contain only one address-that of ...

One manifestation of the increasing global competi- tion in the pager industry is the constant ...

DESCRIPTION OF THE CONCEPT The side view of the bumped thermal test chip assem- bly is shown in ...

This document includes comments and recommendations by the IAB on some architectural and policy ...

This document discusses those things that application designers might wish to consider when ...

The Host-Host Protocol Glitch Cleaning Committee met for the second time at UCLA on 8, 9 March ...

I. A Summary of the IMP Software

This note is a revision of NWG/RFC #3

implementation of the protocol known as the Network Control Program. ("NCP" later came to be used ...

Wednesday Evening, February 17

A partial answer is that of providing at the serving end a teletype scanner process that is always ...

At the Network meeting at the University of Illinois, it was agreed to reserve a link for use in ...

In the discussions that follow, 'byte' means 8 bits, with those eight bits numbered 0-7 from left ...

The answer to a number of questions about the characteristics and operation of Network HOSTS will ...

The NWG/RFC Guide is an attempt to introduce some order into the NWG/RFC series, which now numbers ...

At the NWG meeting in Urbana on 17-19 February 1971, a committee was established to look at the ...

Attendance List at the Urbana NWG Meeting

Since the early days of the Arpanet, electronic mail has been in wide use and many regard it as an ...

This RFC defines a proposed standard protocol to support NetBIOS services in a TCP/IP environment. ...

This RFC defines a proposed standard protocol to support NetBIOS services in a TCP/IP environment. ...

The existing battery holders, especially the one used for Ilat batteries, are made of two pieces: ...

The circuit eliminates a pin or an extra mechanical RF plunger in the radio accessory connector ...

In scme radios, a battery saver mode for PL was not enabled due insignificant current savings. The ...

A portable radio which offers channel selection option requires some type of selector switch to ...

In the Secure Telecommunications business there exists a need for special function modules to ...

Lightly-doped drain (LDD) structures are typically used to suppress hot-carrier effects in ...

This invention applies to integrated circuits which make use of boundary scan architecture. For ...

This invention allows multiple power devices to be tkmly secured against a heatsink by means of a ...

As mechanical shock performance expectations increase in personal communication devices, improved ...

Microcell systems are currently operating in many countries around the globe. With the large amount ...

Currently, the holster used with the advisor pager bears a single clip mount (see Figure 1). FIG. ...

The current technique of ascertaining microcracks in packages comprises of penetrating dye into the ...

A classical problem in integrated circuit design is controlling the slew rate of digital output ...

In computer operation, a high speed intermediate cache memory enhances computation throughput. For ...

SENSE cur Transistors Ql and Q2 shown in the above sche- matic are the output devices of an ...

The ability to form variable width and variable depth isolation regions on the same device has been ...

State-of-the-art RF Power Amplifier Modules used for portable communication transmitter ...

For high speed bipolar and BiCMOS transistors, parasitic capacitances must be minimized. Base and ...

This report describes a circuit technique for the design of Digital to Analog Converters (DACs) ...

The SOLDER STENCIL VACUUM CLEANING SYSTEM is a device used by a solder printing mecha- nism to ...

The concept is essentially a micro-thermocouple (T-tip) for which micro-fabrication processes are ...

Today's hardware designer has a multitude of devices to choose from when beginning a new design. In ...

The ALE (Automatic Link Establishment) feature has recently become one of the most important ...

Field Programmable Logic Array (FPGA) devices are now beginning to rival custom gate arrays in ...

A consequence of the increasingly large numbers of subscribers using cellular systems is that cell ...

High lead count IC packages require tine pitch wire bonding. The design and processing of a blanked ...

The fabrication of state-of-the-art integrated circuits requires imaging of sub-O.5 micron features ...

Coplanar or "dome" shape IC packages using stand- ard epoxy dispensing techniques for chip carriers ...

In some battery powered products using a piezo- electric transducer as an alerting device, it is ...

Sealing electrical assemblies can be a problem when using containment housings made horn plastic. ...

As the geometries of VLSI devices continue to shrink, not only do the etch processes become more ...

The transtnisrion of non time critical information over Common Channel SignaIling Number 7 (037) ...

Radiating feeder cables are primarily designed to distribute radio signals in confined areas. They ...

In trunked radio control systems management dis- patchers may regroup one or more radios to dynamic ...

The Authors have devised an improved process for As one can see above, the critical gate dimension ...

Because of the increasing size and complexity of integrated circuits, fault simulation and ...

Traditionally, microprocessor based systems were debugged using an In-Circuit-Emulator (ICE)+ ...

The figure that follows shows a conversion circuit, which can take ECL level inputs, perform NOR ...

Process variations and defects (random and system- atic) necessitate that semiconductor wafers be ...

Microcontrollers (MC&) thrive on the ability to be integrated with an assortment of non-volatile ...

Wafer Bonding has become a weU known and pre- ferred process for producing Silicon on Insulator ...

In order to achieve a suitable method of Sh4T robotic assembly with a no-clean low viscosity flux, ...

Selective call receivers, including pagers, generally comprise a receiver and decoder board, each ...

Direct Digital Synthesis (DDS) systems can be source systems are an image rejection mixer and a ...

The described method allows to measure, simply and inexpensively, minute amounts of liquids which ...

Under adverse lighting conditions, a pager's user input controls may be difficult to locate, ...

Information service systems can be defmed as pag- ing systems in which many of the paging receivers ...

For various systems it is necessary to measure the delay that signals will experience as they ...

This document defines a basic set of requirements for reliable server pooling.

This memo obsoletes RFC 1700 (STD 2) "Assigned Numbers", which contained an October 1994 snapshot ...

ID890141

ID606410

Partial collapse of a honeycomb core during curing of a composite is known in the industry as "core ...

The processing of carbon fibers to produce the desired properties from the polymer precursor state ...

The programming of floating gate based Non-Volatile Memory (NVM) cells using Hot Carrier Injection ...

A deposited Anti Reflective Coating (DARC) can react with an overlying photoresist. This problem is ...

Scatterometry is a method of measuring critical dimensions in the semiconductor manufacturing ...

RapidIO requires the following ordering requirements ... 1. Packets arrive with sequential ackids ...

This proposes a method and apparatus for DMA transfer broadcast across multiple interfaces and ...

This proposes a method and apparatus for optimizing direct memory access (DMA) read papers & write ...

Today's System-On-A-Chip (SoC) designs need embedded processors with sophisticated debug and ...

Enhanced Reliability of Flip Chip Packages with Organic Substrates by Using Crack Propagation ...

Enhancement of Fine Pitch Flip Chip Interconnection by Using Thin Soldermask

Wafer-level capacitance measurement results often contain significant amounts of error. Even when ...

This document specifies a packetization scheme for encapsulating 12-bit nonlinear, 20-bit linear, ...

This document specifies the packetization scheme for encapsulating the compressed digital video ...

While reliability and functionality remain the domi- nant factors in the paging market, fashion is ...

The purpose of this invention is to include an extra control IC. The part of the IC using this ...

It is becoming essential to develop methods to com- bine multiple base repeaters onto a single ...

Thorough testing of so&we is imperative for smooth and eff%mt operation. Software problems caused ...

This invention starts with a standard microstrip direc- tivity. This coupler which uses multiport ...

Password protection of buttons, or features, on a communications console prevents unauthorized ...

Systems include resources such as tiles, disks, database table, printer, nodes or sites and for ...

Fitly to seventy percent of the cost of software is spent after the product is initially delivered. ...

The modem method of electronics enclosure man- ufacture utiliies extruded aluminum sections to form ...

There are two distinct lighting techniques employed for Robotic Vision Assisted Placement. A ...

Static RAMS with densities of 16Mb or more will require polysilicon PMOS thin-film transistor (TFT) ...

The conventional planar MOSFET with LOCOS type isolation suffers from two problems with respect to ...

The TAB Grid Array is a combination of TAB ILB and a pad grid array for the OLB. The inner leads ...

As a specific example (Figure 2), it may be required to display the power output of an amplifier to ...

Modem land mobile radios are often equipped with microprocessors or other complex integrated ...

Housing/cover plate seal interfaces that protect del- icate electronics must resist volatile ...

Some of the earliest successful C&As MMIC cir- cuits include RF switches, which form one of the ...

Whenever a supplier of CAD or other large soft- ware tools provides an end user with sofhvare, ...

Advance single layer liftoff processing has been developed to reduce the cycle time, minimize ...

This publication describes a digital counter design for systems where minimum clock period phase ...

The following explains the use of local encryption as a tool to protect infomx&n received and ...

Solder paste properties (mesh, viscosity, tackiness, et cetera) play a key role in surface mount ...

In order to achieve a suitable reflow profde for high melting point (220-3OYC) solders in a ...

The problem with push buttons or a rocker button for multi-directional controlling is that they ...

The trend in the electronic industry is towards min- iaturization. As products become smaller, the ...

One of the main variables in effective PC board assembly is the solder paste print quality. Methods ...

With an ever increasing focus on product cost reduc- tion and manufacturing efficiency, product ...

PROBLEMS SOLVED A basic function provided by existing radio control systems like SmartNet is the ...

The telephone operating companies in the United European F7T's offer ISDN service at the S/T ...

An approach to providing a low-noise RF signal synthesizer having fme frequency resolution and ...

The first indication that something might be wrong with the network, be it tethered or untethered, ...

The position of a vibrator motor in a pager is cm- cial to achieve optimum acceleration forces. The ...

Binary only numeric paging has attained large pop- ularity and widespread system implementation ...

Radio frequency (RF) transistors are typically uti- lized in communication products including ...

Presently, accessory recognition is accomplished via the interconnection of an electrical lime or ...

Mobile Radio operators sometimes need to rapidly change the radio operation through several button ...

Zur Überprüfung der Geradheit von Zentrumsbohrungen von zylindrischen Canon Teilen wird die ...

ID201753

A well-known way of adding hysteresis to a compa- rator is the Schmitt trigger conftguration which ...

Existing stamping methods generate scrap material. Stampings done on progressive dies (Figure 1) ...

BACKGROUND OF THE INVENTION SUMMARY OF THE INVENTION This invention relates to the selection of ...

RTU -Remote Terminal Unit. An RTU consists of a microprocessor, ROM, RAM and/or flash memory, and ...

A flexible, low cost racking system is described for electronic equipment such as a cellular base ...

In the past, Bum-In and High Temperature over Operating Life (HTOL) Testing was performed by ...

A merged MOSFET-Bipolar structure with 3D archi- tecture is proposed. The proposed concept is ...

This publication describes a methodology for per- forming a non-des~ctive/non-abrasive RF test of ...

The TEQ program is a menu driven database man- the screen a few words describing the job ...

The ability to place or receive phone calls on a radio unit is offered on all Motorola Trunked ...

Many robotic applications require the use of a break- away or safety coupling to protect the end ...

As pagers become more feature laden the need arises in Figure 1, and contacting them to the pager ...

Disclosed is a method for creating productivity and labor models for material services ...

As pagers get smaller and take on new and more unique form factors and features the size of the ...

Many factors must be considered in the design of pagers today. Four of the most critical are low ...

This publication describes a method whereby a Fixed End Operator is able to initiate the dynamic ...

The mechanical and electrical design of the connec- tion of the battery to the radio could be ...

For several years thin film resistors composed of chromium, silicon and nitrogen (CrlSi/N) have ...

A method to access electronic information quickly and accurately can be. accomplished using ...

Practical rapid charging of nickel-cadmium (Ni-Cd) and nickel-metal hydride (Ni-Mh) batteries ...

In order to obtain a submersible seal on a noise The laminate consists of a plastic carrier, foam ...

There are many times when a message is received over a 2-way radio or a tone and voice pager which ...

The smaller size of today's pagers also reduces their weight proportionately. Traditional charger ...

When an electronic product incorporates a display which might be used in low light conditions, it ...

The addition of a stainless steel ring to a commonly- used gas fitting increases the safety of the ...

This document presents the Telephony Routing over IP (TRIP). TRIP is a policy driven ...

Disclosed is a method for a socketless design for flip-chip pin grid array (FCPGA) package and ...

Disclosed is a method for an apparatus for convection cooling using a product label. Benefits ...

Disclosed is a method for a stiffener plate for add-in cards to prevent component breakage or ...

Disclosed is a method for added dielectric laminate printed circuit board (PCB) design for a ...

Disclosed is a method for a CPU/integrated heat spreader (HIS) snap-in frame. Benefits include ...

Disclosed is a method for an assisted twist/knuckle lever for enabled package removal. Benefits ...

Disclosed is a method for strip-based testing of chip scale packages for stacked die product ...

Disclosed is a method for an on-load thermal insulating fixture for a molding machine. Benefits ...

Disclosed is a method of controlling thermal interface material bond-line thickness to reduce ...

Disclosed is a method for a universal inspection and measuring jig. Benefits include reduction of ...

Disclosed is a method for an AF plasma beam mold die cleaner. Benefits include improved process ...

Disclosed is a method for the use of thermo-chromic materials in serial number labels for ...

Disclosed is a method for reducing die attach defects by using a foreign material blower. Benefits ...

Disclosed is a method for a low cost, self-aligned and bumpless process for integrated circuit (IC) ...

Disclosed is a method for on-screen source-editor distinction of compiled versus uncompiled code. ...

Disclosed is a design for providing a more consistent spring force to hold the substrate and/or ...

Disclosed is a method of WBEM-based application management. The disclosed method supports ...

Disclosed is pad backer for orbital chemical-mechanical polish (CMP) application for improved ...

Disclosed is a circuit that implements the User Datagram Protocol standard (UDP) 16-bit checksum ...

Disclosed is a method for programming DMA (direct memory access) controllers to minimize peripheral ...

Disclosed is a method for capturing and displaying system sensor data during BIOS boot routines. ...

The invention is a three-ply foil comprising approximately 100 nm of highly resistive (1-20 ...

HTTP/1.1 defines a Content-MD5 header that allows a server to include a digest of the response ...

This document specifies how the features of the Service Location Protocol, Version 2 allow for ...

This document describes how delta encoding can be supported as a compatible extension to HTTP/1.1.

Disclosed is a method to improve browse capability in integrated development environments (IDE). ...

Disclosed is a method for permitting flexible, deterministic, post-silicon testing of ...

Disclosed is a tool for checking the belt tension of lift mechanisms for certain metal-sputtering ...

Disclosed is a device which puts a personal computer (PC) into a sleep state and reactivates the PC ...

Disclosed is a design which implements an inter integrated circuit bus (I2C) slave device with an ...

Disclosed is a method to build cross-platform compliance within the system abstraction layer (SAL) ...

Disclosed is a method for encouraging acceptable illumination for using a tethered PC camera. ...

Described herein is a means of providing chronic direct and/or alternating electrical stimulation ...

Ink-jet inks of good pH stability may be prepared from compositions which comprise one or more ...

The MC68340 is a 32-bit integrated processor unit with peripheral subsystems. The MC68340 is a mem- ...

This invention refers to an inter-base handoff in a DECT (Digital European Cordless Telephone) ...

The AC-Scan technique is described where an AC test signal can be generated by being sent out of a ...

In a wide area system with a centralized audio switch (refer to figure l), the creation of channels ...

The following explains a method to enable the sender of information to have control over the access ...

Even a properly specified and designed radio data network may occasionally be presented with peak ...

In a CRT windows environment, it is desirable to resize and relocate widows such that they don't ...

The APDAC TAB organization is concerned with the bumping of wafers using an Englehard gold sufite ...

Work has been done to develop the Ni-7%/Ag backmetal system. The purpose of this backmetal is to ...

The frequency of a periodic signal may be deter- mined by counting zero crossings of the signal in ...

Transmission electron microscopy (TEM) is a tech- nique used for analyzing the microstructures of ...

The assembly technique shown in Figure #l, eliminates a fastener which is commonly used to retain ...

Disclosed is a method for preventing misorientation by using a keyed through-hole mount ...

Disclosed is a method for high-density routing and interconnection for flip chip packaging. ...

Disclosed is a method for internally wired barcode scanning with an in-circuit tester. Benefits ...

Disclosed is a method for an embedded resistance temperature detector (RTD) on an integrated heat ...

Disclosed is a method for alignment between a socket and a package. Benefits include improved ...

Disclosed is a design for a fan heatsink clip attach/detach tool. Benefits include decreased ...

Disclosed is a design for a self-contained, encapsulated, field-replaceable, spring loaded ...

Disclosed is a method for an efficient instruction memory architecture for MIMD-based computing ...

Some defect/particle detection systems designed for semiconductor applications arc based on a ...

This invention modiiies an ASM plasma plate boat standard ASM heating element/plasma system has a ...

The out-of-band emanations f?om a mobile unit radio frequency (RF) transmitter may cause ...

The ASCII Character Encoding Scheme eliminates the need for Teletype-style terminals to send ASCII ...

Liquid Crystal Display backlighting is economically achieved thm incandescent lamps. Leaded lamps ...

Individual semiconductor layer features must be the right size and have tight critical dimension ...

This invention is related to the field of communica- tions via a trunked radio system. Typically, ...

Improvements in miniaturization have made two- way radios so small that they may be packaged in the ...

Current digital oscillator compensation is accom- of oscillator compensation (estimated chip area ...

Analog memory storage can replace the computa- storage for a phase accumulator resolution of 32 ...

For a Frequency Modulated (FM) signal the range or coverage. However, when the transmitter car- ...

This invention allows radio users and service per- sonnel to make in-the-field adjustments to a ...

In the office place both cellular phones and desktop phone play a vital role as a means for ...

Some portable and mobile radio customers desire a way to scan for Quick Call II tones. Current ...

The typical modem pager is designed with a feature to determine when the pager can no longer ...

The device utilizes a light-emitter eg LED housed together with a light detector. The assembly is ...

In a networked trunking system, the subscriber unit user population for a logical grouping of users ...

There are a number of methods for fabrication of bipolar transistors within a BiCMOS process. In ...

A card cage is shown in Figures 1 and 2 with integral cooling system features for high density ...

This paper presents an e&ient method of comput- ing the syndrome of a binary BCH code which takes ...

In current trunked systems, preemption of chan- nels actively involved in other call activity is ...

Component substrates such as PGA and flat packs are normally aligned by vision and placed on wet ...

In digital data transmission systems, it is generally desirable to have DC balanced data (equal ...

The idea consists in using the same MCU I/O port to drive a power mosfet device containing some ...

The purpose of this mechanical housing concept is to provide an optimized volume shape for ...

This memo defines a portion of the Management Information Base (MIB) for use with network ...

This memo describes a strategy for resisting the Million Message Attack.

In Digital Very Low IF (DVLIF) or Direct Conversion Receivers (DCR) most of the channel selectivity ...

While the standard design for a belt clip securely fastens a pager to a belt or the waistband of ...

A simple, cost effective, volume control can be built for most electronic devices. Many consumer ...

Present paging systems are based on providing serv- ice 1ocaUy (citywide or private), regionally, ...

The Global Positioning System (GPS) is a network of satellites owned and operated by the Department ...

The analog portion of clock display can not only be display could alert the user as to how much ...

The art of solder printing is continually being ret&d. paste being discarded. The recirculating ...

Many factors must be considered in the design of pagers today. Four of the most critical are low ...

In the process of stripping insulation from electrical wires, the small pieces of stripped ...

This publication describes a method that allows for the substantial size reduction of an electrical ...

Flexible manufacturing has made it possible to run a fully automated factory where the production ...

Transmission electron microscopy [TEM] is an ana- lytical technique that involves propagation of ...

There arc currently only a limited number of ways to input programming information into pagers, ...

Typically, a pager is programmed through the use An improved method for accomplishing this pro- of ...

A lost cost clip/holster combination can be achieved by first molding a spring like clip capturing ...

As paging products reach higher levels of sophisti- cation, battery lie becomes a very important ...

For a Frequency Modulated (FM) signal the recovered message signal amplitude is directly related to ...

Silicon-germanium (SiGe) heterojunction bipolar transistors (HBTs) have recently demonstrated their ...

Conventional GaAs MESFET fabrication involves a recess gate etch step which must be tightly ...

In the near future digital paging services will pro- vide much mc~re than a numeric phone number or ...

As pagers get smaller and take on new and more uni- que form factors and features the area for ...

Due to unavoidable component tolerances, prese- lectors and other discrete, L-C falters often need ...

Increasing demands from all markets for larger infor- could be used to provide a basic "out of ...

Increasing numbers of pager users rely on silent alert features to recognize that a page has been ...

Fax data transmission to mobile radios, using nor- mal analog audio channels, can encounter a ...

Eliminating Voice Truncation with the IMBE Vocoder

This paper describes a DDR (double data-rate) transmit mechanism that does not require a dedicated ...

This invention proposes a mechanism for bandwidth management for stride transfers. It also proposes ...

This invention proposes a mechanism to support Hot-plug capability for RapidIO devices without ...

This invention uses a buried etchstop layer in the via dielectric to provide via bottom size ...

This paper discloses a packet formatting mechanism that is area efficient and has minimal logic ...

SONOS (Silicon-Oxide-Nitride-Oxide-Silicon) and similar thin film storage non-volatile memory has ...

Disclosed is a method for a fixture design for premount pellicle inspection using reticle ...

Disclosed is a method for loopback chaining for testing systems with multiple media access devices. ...

Disclosed is a method of magnetostatic filtration and trapping for electroless Co baths. Benefits ...

Disclosed is a method for dynamic pixel sampling on a zone renderer using vertex transformations. ...

In radio data systems where the preponderance of data message traffic is directed inbound (from ...

This publication describes a method of improving the Motorola Single Frequency Re-use algorithm by ...

The ability to transmit facsimilies of original docu- ments over the Public Switched Telephone ...

Transmission electron microscopy ITEM] is an ana- lytical technique that involves propagation of ...

Plasma processing is well established as a means of etching and depositing dielectrics, ...

Paging terminals can have the capability to store incoming messages (pages) while the terminal is ...

A compact, active optical system, utilizing graded index (GRIN) rod lenses, was previously proposed ...

In accordance with standard practice, the word "hybrid' as used here also means "hybrid power ...

The problem was presented as the need for a cus- tomer to replace the ever increasing weight and ...

Breakage of glass Liquid Crystal Displays (LCDs) in portable communications products, including ...

The DSP-1 Driver is designed to efficiently test a whole core group of the Digital Signal Processor ...

Inspection of cosmetic and scratch defects is purely objective at the operator level. The tools ...

Currently Motorola Pagers use the SC1 (Serial Com- munications Interface) to provide a means of ...

This article describes an approach to charging the battery of battery operated peripherals attached ...

Private paging already exists for hospitals and bar code scanners are widely used in many stores. ...

In many products being produced today, the same hardware is used for detecting Low Cell and Dead ...

On paging products with side mounted displays and controls when removing the pager from the ...

Replacing Watch pager wrist strap assemblies can be made more convenient for the customer by ...

The trend in the electronic industry is towards min- iaturization. As products become smaller, the ...

In a trunked radio system, a user attempts to initiate a conversation by making a channel request. ...

The described circuit within a battery housing is used to disconnect the internal cells from the ...

Use of telephone interconnect on a portable or mobile radio usually requires a lot of ergonomic ...

In an environment with two or more microproces- this valid-msg-token. With all tasks in the master ...

Problem to be Solved-Most portable synthesizer designs consist of a dual VCO approach where one VCO ...

It is becoming important to efficiently emulate the Java Virtual Machine on non-Java processors. ...

This invention is the use of dummy gate poly shapes to shield the edges of wells from ambient ...

This invention is an electrical test structure capable of detecting the presence of a dendritic ...

The entire concept of the case is that through an air bladder system the case can expand or ...

When a new customer reviews a portable radio, cape- If a cutout were provided in the last or last ...

Motorola portable and mobile communications prod- ucts typically have a transmit/receive indicator. ...

Recent developments in R-F chokes have seen a drastic reduction in the size of chip coils. Hybrids ...

The application of StereoLithography to rapidly pro- duce models has received considerable ...

This invention offers a vastly improved protocol to monitor and diagnose faults, in a real time ...

In a simulcast system the remote sites are linked to the prime site through digital loop consisting ...

This publication describes an inexpensive circuit for an enhanced frequency/period counter. ...

A major reliability issue for high performance bipo- lar transistors is the reduction of forward ...

Surface mount devices are typically mounted to printed circuit boards using automated equipment. ...

The Selective Radio Inhibit feature allows the CentraVBasestation operator to send a message to a ...

This publication describes a broadband quadrature coupler which is appropriate for microwave ...

This memo defines an extension of the Management Information Base (MIB) for use with network ...

This memo defines an extension of the Management Information Base (MIB) for use with network ...

This publication describes a technique for active align- ment of hermetically sealed optical ...

When a radio user travels over great distances in a network of radio systems, he will pass from one ...

This invention offers a protocol to monitor faults, in a real-time fashion, within the local area ...

Variable tuning elements are diicult to achieve on GaAs Monolithic Microwave Integrated Circuits ...

Lithography is one of the gating technologies restricting the evolution to larger integrated ...

This describes a video system controller (VSC) for systems utilizing cathode ray tube (CRT) ...

This publication describes an implementation of a bi- directional t?equency bim for a shipline ...

In an effort to reduce post assembly hand tuning, electical means must be sought to adjust many ...

In wide area trunked communication systems, such as the Motorola AMSS or SmartZone systems, calls ...

Current crystal insulator designs, while serving the purpose of protecting components horn solder ...

Pagers available on the market today contain pager owner to generate an alarm alert. This allows ...

This publication describes a thermal expansion decoupler for use in packaging electronic parts for ...

AC FREQUENCY MINIMUM-AMPLITUDE DEVICE-TYPE DETECTION METHOD

Disclosed is a method for embedding projection capabilities into digital cameras. Benefits include ...

Disclosed is a method of protecting a USB port from excessive power drain. Benefits include ...

Disclosed is a method for power reduction for CPUs through compiler-directed scheduling for ...

The invention relates to remote controlling equip- ment, such as remote keys for locks and alarm ...

The radial resistivity gradient (RRG) of (111) crys- tals is about double the RRG values of (100) ...

Extensive reliability testing of epoxy glob top mate- rials have shown that they have reduced ...

Subscribers to a paging service may elect to identify specific CL1 (Caller Line ID) numbers and ...

It is commonplace to have pagers and other porta- ble products monitor the capacity of the power ...

Many products today arc implementing volatile memory systems with rechargeable battery backup for ...

The transmission of Kanji messages provides an advantage to the Paging and other data message Mar- ...

The large size of modem designs results in increased complexity of hierarchical design data. Since ...

This paper describes a method to improve the per- formance of higher radix SRT dividers built t?om ...

Single ported synchronous memories usually have a single address access path referenced to a given ...

Digital Signal Processors are being widely used in telecommunication systems. They provide a great ...

In many small communication devices both a liq- uid crystal display (LCD) and a keypad are used by ...

Disclosed is a method for connector contacts. Benefits include improved module retention and ...

Disclosed is a method to use register allocation to reduce the size of data required for garbage ...

Disclosed is a key term acquisition method that combines a multi-iterative statistical mechanism, ...

Disclosed is a design of an algorithm to match users queries with frequently asked questions ...

ORGANIC MESOMEMS INTEGRAL ACCELEROMETER

The present portfolio of paging receivers which offer displayable alphanumeric/graphic messaging ...

It has been determined that vibrational silent low the user to select particular on and off ...

There are several approaches that can be taken to This invention solves these problems by using a ...

A process for encapsulation cure overcomes problems encountered when TAB tin plated leadframes are ...

State-of-the-art automatic wire bond inspection stations provide "hands-or damage-free, magazine- ...

This paper describes a method, other than weighing or visual inspection, for the detection of ...

Strong market demands for wide output power level adjustment range, microcontroller based, FM ...

Most data detection systems use commercially avail- able 4-8 bit A/D converters which are high ...

A Variable Bandwidth Lowpass Filter (VLPF) dis- an identical differential paii of transistors 3, 5, ...

The implementation and operation of an SSI (small scale integration) all npn peak hold circuit is ...

A wide variety of publications are available which While these application& have been well ...

One of the major problems in specifying an in house carrying tote for finished printed circuit ...

The intent of the invention is to provide law enforcement members a way to find escaped suspects ...

FIELD OF THE INVENTION This invention relates in general to the field of elec- trical devices ...

FIELD OF THE INVENTION This invention relates in general to the field of selective call receivers, ...

As technology continues to shrink the electronic components that go into pagers, the pager housing ...

A large part of the paging market consist of women users. By combining the alert mechanism ...

In a pager with a microcomputer based decoder, this invention will allow a microprocessor to run at ...

Pagers can be inadvertently switched to the "off position which can cause the entire memory (all ...

Personal communications devices such as pagers and personal communicators are getting smaller to ...

This invention provides a position sensitive switch that can be used in h4AN DOWN radio ...

In radio products today an important parameter to have is wide bandwidth. Typically bandwidths of ...

In order for the user to recognize where the base station is located, this in+ntion starts sending ...

The purpose of this paper will show how to add a Universal Programmable Remote Control to an ...